Automatic Break Failure Indicator and Engine over Heating Alarm

Automatic Break Failure Indicator and Engine over Heating Alarm

** Delivery Charges Extra
₹5,500.00
Product Code: Mechanical - Fabrication
Availability: Pre-Order
Viewed 2347 times

Product Description

Aim:

          The aim is to design and develop a control system based an electronically controlled automatic brake failure indicator by using IR Sensor and engine over heating alarm by using heat sensor is called “AUTOMATIC BRAKE FAILURE INDICATOR AND ENGINE OVER HEATING ALARM”.

Abstract:

          The braking system of a car is undoubtedly one of its more important features. The aim of this work is to create a better braking system with indicator. Brake failure occurs only because of worn out of brake shoe and cut in liner. It consists of two sensors. One sensor is connected with the brake shoe. The other sensor is the brake liner. The signal from the two sensors is given to a microcontroller. When the brake shoe is worn out, the sensor senses signal to the microcontroller. Also if the brake liner is cut, the sensor sends signal to the microcontroller. The microcontroller analyses the signal and operates the corresponding indicator. It nothing wrong, the vehicle will move and if any one critical, the vehicle will stops and the screen shows the indication of brake failure. Since this indicates the status of the brake, the user can identify the condition of the brake and thus limiting the chances of malfunction. 

        Car safety is the avoidance of automobile accidents or the minimization of harmful effects of accidents, in particular as pertaining to human life and health. Special safety features have been built into cars for years, some for the safety of car’s occupants only, and some for the safety of others. Automatic brake failure indicator and engine over heating alarm is consists of IR sensor circuit, Heat sensor Circuit, Control Unit and frame. The sensor is used to detect the brake wire. There is any disconnection of the brake wire or cutting of any few turns of brake wire, the control signal to the alarm unit. Similarly the heat sensor is fixed to the engine and this heat is measured and giving the alarm signal when the engine heat exceeds the setted temperature limit.


Proposing Theory:


         Project “automatic head light dim/bright controller and engine over heat alarm” which is fully equipped by sensors circuit, dim/bright light and engine over heat alarm circuit. It is genuine project which is fully equipped and designed for automobile vehicles. This forms an integral part of best quality.The braking system of a car is undoubtedly one of its more important feature. The aim of this work is to create a better braking system with indicator. Brake failure occurs only because of worn out of brake shoe and cut in liner. It consists of two sensors. One sensor is connected with the brake shoe. The other sensor is the brake liner. The signal from the two sensors is given to a microcontroller. When the brake shoe is worn out, the sensor senses signal to the microcontroller. Also if the brake liner is cut, the sensor sends signal to the microcontroller. The microcontroller analyses the signal and operates the corresponding indicator. It nothing wrong, green indicator will glow and if any one critical, red indicator will glow. If the brake is failure in running time, an alternate brake will be operated by the microcontroller automatically. This prevents unnecessary accident. Since this indicates the status of the brake, the user can identify the condition of the brake and thus limiting the chances of malfunction


When you order from finalyearprojects.in, you will receive a confirmation email. Once your order is shipped, you will be emailed the tracking information for your order's shipment. You can choose your preferred shipping method on the Order Information page during the checkout process.

The total time it takes to receive your order is shown below:

The total delivery time is calculated from the time your order is placed until the time it is delivered to you. Total delivery time is broken down into processing time and shipping time.

Processing time: The time it takes to prepare your item(s) to ship from our warehouse. This includes preparing your items, performing quality checks, and packing for shipment.

Shipping time: The time for your item(s) to tarvel from our warehouse to your destination.

Shipping from your local warehouse is significantly faster. Some charges may apply.

In addition, the transit time depends on where you're located and where your package comes from. If you want to know more information, please contact the customer service. We will settle your problem as soon as possible. Enjoy shopping!

Download Abstract

Click the below button to download the abstract.

Package Includes

Software Projects Includes

  1. Demo  Video
  2. Abstract
  3. Base paper
  4. Full Project PPT
  5. UML Diagrams
  6. SRS
  7. Source Code
  8. Screen Shots
  9. Software Links
  10. Reference Papers
  11. Full Project Documentation
  12. Online support


The Delivery time for software projects is 2 -3 working days. Some of the software projects will require Hardware interface. Please go through the hardware Requirements in the abstract carefully. The Hardware will take 7-8 Working Days

 

Hardware Projects Includes

  1. Demo  Video
  2. Abstract
  3. Base paper
  4. Full Project PPT
  5. Datasheets
  6. Circuit Diagrams
  7. Source Code
  8. Screen Shots & Photos
  9. Software Links
  10. Reference Papers
  11. Lit survey
  12. Full Project Documentation
  13. Online support


The Delivery time for Hardware projects is 7-8 working days.

   

Mini Projects: Software Includes

  1. Demo  Video
  2. Abstract
  3. Base paper
  4. Full Project PPT
  5. UML Diagrams
  6. SRS
  7. Source Code
  8. Screen Shots
  9. Software Links
  10. Reference Papers
  11. Full Project Documentation
  12. Online support

 

The Delivery time for software Miniprojects is 2 -3 working days.

 

Mini Projects - Hardware includes

  1. Demo  Video
  2. Abstract
  3. PPT
  4. Datasheets
  5. Circuit Diagrams
  6. Source Code
  7. Screen Shots & Photos
  8. Software Links
  9. Reference Papers
  10. Full Project Documentation
  11. Online support

The Delivery time for Hardware Mini projects is 7-8 working days.