Design and Analysis

Grid View:

CFD Study on Aerodynamic effects of a Rear Wing / Spoiler on a Passenger Vehicle

₹5,000.00

ABSTRACT           Aerodynamic characteristics of a racing car are of significant interest in reducingcar-racing accidents due to wind loading and in reducing the fuel consumption. At the present, modified car racing becomes more popular around the world. Sports cars are most commonly seen with spoi..

Design & Static Analysis of Rear Axle Tractor

₹5,000.00

Abstract:          This work considers the static analysis of rear dead axle with the help of computer aided engineering (CAE) tool. Finite element analysis of rear dead axle carried out with actual design consideration and loading conditions. CREO software is used to design the different parts and assem..

Design and Analysis of an Excavator Bucket

₹5,000.00

Abstract              An excavator is a typical hydraulic heavy-duty human operated machine used in general versatile construction operations, such as digging, ground leveling, carrying loads, dumping loads and straight traction. After doing such operation, there is possibility of bre..

Design and Analysis of Composite Piston

₹5,000.00

Abstract            The project mainly deals with the design, analysis of piston. A piston is a component of reciprocating engines, reciprocating compressors and pneumatic cylinders among other similar mechanisms. In an engine, its purpose is to transfer force from expanding gas in the cylinder..

Design and Analysis of Crankshaft for Single Cylinder Engine

₹5,000.00

ABSTRACT               Crankshaft is one of the critical components for the effective and precise working of the internal combustion engine. In this paper a dynamic simulation is conducted on a crankshaft from a single cylinder 4- stroke diesel engine. A three-dimension model of ..

Design and Analysis of Dual Hook Joint in FEA

₹5,000.00

ABSTRACT          This Project involves in modeling and analysis of a simple DUAL HOOK JOINT. Modeling was done by using advanced design software CREO{Feature based parametric bi-directional software}. By using the features of this software DUAL HOOK JOINT was modeled. Individual parts of this dual hook ..

Design and Analysis of Dual Hook Joint in FEA

₹5,000.00

ABSTRACT           This Project involves in modeling and analysis of a simple DUAL HOOK JOINT. Modeling was done by using advanced design software CREO{Feature based parametric bi-directional software}. By using the features of this software DUAL HOOK JOINT was modeled. Individual parts of this dual..

Design and Analysis of Propeller Blades

₹5,000.00

Abstract             The objective is to design and analysis of propeller blades. In this project CFD (Computational Fluid Dynamics) analysis software (CFX- Solver) is used to investigate flow behavior of air over the propeller blades used in jet engines. In this the model is designed using CRE..

Design and Analysis of Single Crane hook

₹5,000.00

Abstract:             Crane hook is very significant component used for lifting the load with the help of chain or wire ropes. Crane hooks are highly liable components and are always subjected to bending stresses which leads to the failure of crane hook. To minimize the failure of crane ho..

Failure Analysis of Internal Combustion Engine Valves by using ANSYS

₹5,000.00

Abstract             Intake and exhaust valves are very important engine components that are used to control the flow of intake and exhaust Gases in internal combustion engines. They are used to seal the working space inside the cylinder against the manifolds; and are opened and closed by means of what is known as..

Finite Element Analysis of 4-Cylinder Diesel Crankshaft

₹5,000.00

Abstract           The stress analysis and modal analysis of a 4-cylinder crankshaft are discussed using finite element method in this paper. Three-dimension models of 480 diesel engine crankshaft and crank throw were created using CREO software The finite element analysis (FEM) software ANSYS was u..

Finite Element Analysis of Mechanical Properties of Composite Material Reinforced by Aluminium-Synthetic Fibers

₹5,000.00

Abstract:            Composite materials are engineering materials made from two or more constituent materials that remain separate and distinct on a macroscopic level while forming a single component. In this work the mechanical properties of GFRP (glass Fiber Reinforcement Plastic), Nylon and thei..

Modeling and Analysis of Multi Cylinder Engine Piston and Piston Rings

₹5,000.00

Abstract           The four stroke otto engine uses just one of the four strokes to perform work. This causes various problems: The engine runs jerkily, and this can only be prevented by a large flywheel, which needs a lot of space and weights pretty much in addition. In this thesis, thermal loads a..

Modeling and Analysis of Propeller Blade

₹5,000.00

Abstract:             Fiber reinforced composites are finding widespread use in naval applications in recent times. Ship sand under water vehicles like torpedoes submarine etc., these weapons require propeller to drive the vehicle. In general propeller will be used as propulsions and it also us..

Modeling and Analysis with Optimization of Connecting rod Using ALFASic Composites

₹5,000.00

Abstract             Connecting rod is the intermediate link between the piston and the crank. And is responsible to transmit the push and pull from the piston pin to crank pin, thus converting the reciprocating motion of the piston to rotary motion of the crank. Generally connecting rods are manufactured using ca..

Showing 1 to 15 of 18 (2 Pages)