CFD Study on Aerodynamic effects of a Rear Wing / Spoiler on a Passenger Vehicle

CFD Study on Aerodynamic effects of a Rear Wing / Spoiler on a Passenger Vehicle

₹5,000.00
Product Code: Mechanical - Design and Analysis
Availability: In Stock
Viewed 1896 times

Product Description

ABSTRACT

           Aerodynamic characteristics of a racing car are of significant interest in reducingcar-racing accidents due to wind loading and in reducing the fuel consumption. At the present, modified car racing becomes more popular around the world. Sports cars are most commonly seen with spoilers, such as Ford Mustang, Subaru Impreza, and Chevrolet Corvette. Even though these vehicles typically have a more rigid chassis and a stiffer suspension to aid in high-speed manoeuvrability, a spoiler can still be beneficial. One of the design goals of a spoiler is to reduce drag and increase fuel efficiency.


           Many vehicles have a fairly steep downward angle going from the rear edge of the roof down to the trunk or tail of the car. Air flowing across the roof tumbles over this edge at higher speeds, causing flow separation. The flow of air becomes turbulent and a low pressure zone is created, thus increases drag. Adding a spoiler at the very rear of the vehicle makes the air slice longer, gentler slope from the roof to the spoiler, which helps to reduce the flow separation. Reducing flow separation decreases drag, which increases fuel economy; it also helps keep the rear window clear because the air flows smoothly through the rear window.


            The limitations of conventional wind tunnel experiment and rapid developments in computer hardware, considerable efforts have been invested in the last decade to study vehicle aerodynamics computationally. This thesis will present a numerical simulation of flow around racing car with spoiler positioned at the rear end using commercial fluid dynamic software ANSYS FLUENT®. The thesis will focus on CFD-based lift and drag prediction on the car body after the spoiler is mounted at the rear edge of the vehicle. A 3D computer model of 4-door sedan car (which will be designed with commercial software SolidWorks®) will be used as the base model. Different spoilers, in different locations will be positioned at the rear end of vehicle and the simulation will be run in order to determine the aerodynamic effects of spoiler.


When you order from finalyearprojects.in, you will receive a confirmation email. Once your order is shipped, you will be emailed the tracking information for your order's shipment. You can choose your preferred shipping method on the Order Information page during the checkout process.

The total time it takes to receive your order is shown below:

The total delivery time is calculated from the time your order is placed until the time it is delivered to you. Total delivery time is broken down into processing time and shipping time.

Processing time: The time it takes to prepare your item(s) to ship from our warehouse. This includes preparing your items, performing quality checks, and packing for shipment.

Shipping time: The time for your item(s) to tarvel from our warehouse to your destination.

Shipping from your local warehouse is significantly faster. Some charges may apply.

In addition, the transit time depends on where you're located and where your package comes from. If you want to know more information, please contact the customer service. We will settle your problem as soon as possible. Enjoy shopping!

Download Abstract

Click the below button to download the abstract.

Package Includes

Software Projects Includes

  1. Demo  Video
  2. Abstract
  3. Base paper
  4. Full Project PPT
  5. UML Diagrams
  6. SRS
  7. Source Code
  8. Screen Shots
  9. Software Links
  10. Reference Papers
  11. Full Project Documentation
  12. Online support


The Delivery time for software projects is 2 -3 working days. Some of the software projects will require Hardware interface. Please go through the hardware Requirements in the abstract carefully. The Hardware will take 7-8 Working Days

 

Hardware Projects Includes

  1. Demo  Video
  2. Abstract
  3. Base paper
  4. Full Project PPT
  5. Datasheets
  6. Circuit Diagrams
  7. Source Code
  8. Screen Shots & Photos
  9. Software Links
  10. Reference Papers
  11. Lit survey
  12. Full Project Documentation
  13. Online support


The Delivery time for Hardware projects is 7-8 working days.

   

Mini Projects: Software Includes

  1. Demo  Video
  2. Abstract
  3. Base paper
  4. Full Project PPT
  5. UML Diagrams
  6. SRS
  7. Source Code
  8. Screen Shots
  9. Software Links
  10. Reference Papers
  11. Full Project Documentation
  12. Online support

 

The Delivery time for software Miniprojects is 2 -3 working days.

 

Mini Projects - Hardware includes

  1. Demo  Video
  2. Abstract
  3. PPT
  4. Datasheets
  5. Circuit Diagrams
  6. Source Code
  7. Screen Shots & Photos
  8. Software Links
  9. Reference Papers
  10. Full Project Documentation
  11. Online support

The Delivery time for Hardware Mini projects is 7-8 working days.