Design and Analysis

Grid View:

Design and Analysis of Dual Hook Joint in FEA

₹5,000.00

ABSTRACT          This Project involves in modeling and analysis of a simple DUAL HOOK JOINT. Modeling was done by using advanced design software CREO{Feature based parametric bi-directional software}. By using the features of this software DUAL HOOK JOINT was modeled. Individual parts of this dual hook ..

Design and Analysis of EV Bike Chassis

₹5,000.00

                        This project presents the Structural and Dynamic Investigation of Electric Motorcycle Chassis followed by it’s fabrication. The purpose is to analysis the chassis motorcycles and the structure, to ensure the mod..

Design and Analysis of Propeller Blades

₹5,000.00

Abstract             The objective is to design and analysis of propeller blades. In this project CFD (Computational Fluid Dynamics) analysis software (CFX- Solver) is used to investigate flow behavior of air over the propeller blades used in jet engines. In this the model is designed using CRE..

Design and Analysis of Salt Water Battery

₹5,000.00

            Thermal management in an electric vehicle is important to extend the life of the battery. This paper is about modelling and analysis of a salt water battery module for improving the thermal performance battery in electric vehicles with PCMs (phase change materials). For a battery th..

Design and Analysis of Single Crane hook

₹5,000.00

Abstract:             Crane hook is very significant component used for lifting the load with the help of chain or wire ropes. Crane hooks are highly liable components and are always subjected to bending stresses which leads to the failure of crane hook. To minimize the failure of crane ho..

Design and Analysis of Train Bogie

₹5,000.00

ABSTRACT          A Bogie is a chassis or framework carrying wheels attached to the train, serving as a modular subassembly of wheels and axles. A bogie may remain normally attached to a railway carriage/car or locomotive. Old Bogies are cast models which are huge and bulky in its nature. The cast bogie ..

Design and Analysis of Vertical Axis Wind Turbine Rotors

₹5,000.00

                  With the shortage of fossil fuels, alternative energy has required for the increasing energy demands of the world. A wind turbine is a rotary device that extracts energy from the wind and converts wind energy into mechanical energy. For efficient ..

Design and Analysis of Wing Structure

₹5,000.00

ABSTRACT:             The objective of this paper is to develop an accurate model for optimal design through design the structure of wing that combine the composite (Skins) and isotropic materials (all other structures) and compare this with the same wing made by changing the material. The..

Design and CFD Analysis of Supersonic Exhaust Nozzle in Scramjet Engine

₹5,000.00

ABSTRACT:             When pressures and temperatures become so high in supersonic flight that it is no longer efficient to slow the oncoming flow to subsonic speeds for combustion, a scramjet (supersonic combustion ramjet) is used in place of a ramjet. This paper is aimed at modeling the ..

Failure Analysis of Internal Combustion Engine Valves by using ANSYS

₹5,000.00

Abstract             Intake and exhaust valves are very important engine components that are used to control the flow of intake and exhaust Gases in internal combustion engines. They are used to seal the working space inside the cylinder against the manifolds; and are opened and closed by means of what is known as..

Finite Element Analysis of 4-Cylinder Diesel Crankshaft

₹5,000.00

Abstract           The stress analysis and modal analysis of a 4-cylinder crankshaft are discussed using finite element method in this paper. Three-dimension models of 480 diesel engine crankshaft and crank throw were created using CREO software The finite element analysis (FEM) software ANSYS was u..

Finite Element Analysis of Mechanical Properties of Composite Material Reinforced by Aluminium-Synthetic Fibers

₹5,000.00

Abstract:            Composite materials are engineering materials made from two or more constituent materials that remain separate and distinct on a macroscopic level while forming a single component. In this work the mechanical properties of GFRP (glass Fiber Reinforcement Plastic), Nylon and thei..

Modeling and Analysis of Multi Cylinder Engine Piston and Piston Rings

₹5,000.00

Abstract           The four stroke otto engine uses just one of the four strokes to perform work. This causes various problems: The engine runs jerkily, and this can only be prevented by a large flywheel, which needs a lot of space and weights pretty much in addition. In this thesis, thermal loads a..

Modeling and Analysis of Propeller Blade

₹5,000.00

Abstract:             Fiber reinforced composites are finding widespread use in naval applications in recent times. Ship sand under water vehicles like torpedoes submarine etc., these weapons require propeller to drive the vehicle. In general propeller will be used as propulsions and it also us..

Modeling and Analysis with Optimization of Connecting rod Using ALFASic Composites

₹5,000.00

Abstract             Connecting rod is the intermediate link between the piston and the crank. And is responsible to transmit the push and pull from the piston pin to crank pin, thus converting the reciprocating motion of the piston to rotary motion of the crank. Generally connecting rods are manufactured using ca..

Showing 16 to 30 of 33 (3 Pages)