Aim: The main stay of the project is to design, mechanize and fabrication of a remote controlled 3-axis wall painting machine with a sprayer powered by a compressor.Proposed System: Here we are going to use a machine w..
Aim:- 3 Axis Slider machine is a process of applying Arc Welding on between surfaces of any object and using with Sensor. Existing:- Arc welding machine is a process of applying Arc Weldi..
Aim : The aim this project the vehicles can be unloaded from the trailer in three axes without application of any impact force. Proposed system: In this project has mainly concentrated on this difficu..
Aim: The main stay of the project is to design, mechanize and fabrication of a 360 degree trailer which can tur or rotate in 360 degrees. Proposed System: Here we are going to create a 360 degree trailer which can easily mo..
SYNOPSISThe aim of our project is to take a system wide approach to preventing the machine accident. The system includes not just the machine and the operator; but rather it includes every thing from the initial design of the machine to the training of every one that is responsible for any aspect of it, to the documentation of all changes to r..
Synopsis In automobile the clutch is a mechanism used to connect or disconnect the power from the transmission line whenever it is necessary. Each and every time while we change the gear we must disconnect the power unit from the remaining transmission line. Normally this process is done by the ..
Aim: To design, mechanize and fabrication of an air engine which uses compressed air to power itself instead of fuel like petrol or diesel. Proposal: Here we are going to create an air engine which uses compressed air..
Objective: The objective of this project is to design the automatic braking system in order to avoid the accident.Scope: This project is necessary to be attached to every vehicle. Mainly it is used when drive the vehic..
SYNOPSISThe aim of our project is to take a system wide approach to prevent the machine accident. The system includes not just the machine and the operator; but rather it includes every thing from the initial design of the machine to the training of every one that is responsible for any aspect of it, to the documentation of all changes to regul..
Aim: The aim is to design and develop a control system based an electronically controlled automatic brake failure indicator by using IR Sensor and engine over heating alarm by using heat sensor is called “AUTOMATIC BRAKE FAILURE INDICATOR AND ENGINE OVER HEATING ALARM”.Abstract:  ..
Abstract: Pneumatics operation technology now-a - days widely used in all kind work related with compressed air. The knowledge from timber work to robot technology it is used with so advanced and also with automation. It is therefore very essential and important for any techni..
SYNOPSIS This project helps us in the automatic opening and closing of shutter in the Dam. This work is performed without human intervention. The level probe indicates the level of water in the Tank.The system comprises of the following components like level probe sensor, limit switch, microc..
SYNOPSIS There are disclosed an automatic gear change control apparatus for an automobile and a method of controlling such apparatus. A rotational output of an internal combustion engine is connected to drive wheels of the automobile and a load device. When a gear shifting-up of an a..
Aim : The Automatic gear changer system is used to change the gear in a tensionless manner.Proposed system : The Automatic gear changer system is used to change the gear in a tensionless manner. In this system a fuel power is n..
Aim : This paper discuss about cad modeling, design and analysis of automatic hammering machine. Our goal for this paper is to design and Fabricate an automatic hammering machine. Proposed system : A programmed hammering machine self-working machi..